Blingstar Child Safe Fairy Lights 33 Ft Multicolor – Nursery, Playroom and Bedroom Lighting for Kids, 30V Adapter, IP44 Waterproof
Blingstar Child Safe Fairy Lights 33 Ft Multicolor – Nursery, Playroom and Bedroom Lighting for Kids, 30V Adapter, IP44 Waterproof
Couldn't load pickup availability
Why you'll love it
- Memory function remembers last mode so you never reset after unplugging
- 6-hour on / 18-hour off timer saves electricity and runs hands-free
- Low 30V voltage stays cool to the touch, safe around kids and pets
- IP44 waterproof rating lets one set work both inside and outside
- Up to 4 strands link end-to-end for large trees and long runs without extra outlets
- 8 lighting modes (steady + 7 flashing) cover subtle to festive moods in one set
Perfect for
- Wrap a Christmas tree for the holidays
- Ambient bedroom fairy light setup year-round
- Outdoor patio and garden party lighting for evening events
- Decorate a wedding reception backdrop or photo wall
- Light a balcony or porch for curb appeal
Frequently Asked Questions
Is the strand safe to hang over a crib or in a nursery?
Yes. The 30V low voltage keeps bulbs and wire cool to the touch, there is no flame and no glass to break, and the 6 hour auto timer shuts the lights off after your child falls asleep. Many parents use them on a nursery shelf, curtain rod, or canopy.
Will my child be able to pull the strand down?
Use clear Command hooks or a cord clip system mounted higher than your child can reach, and route the adapter cord along the wall with a cord cover. The 10 ft lead gives you flexibility to place the adapter behind a dresser or crib.
Is the wire safe if my toddler chews on it?
The strand runs on 30V, which is far below mains voltage, so the electrical risk from a chew is much lower than with a standard household cord. Still, if the insulation is damaged, replace the set rather than continuing to use it.
Will the auto timer work for bedtime and nap time?
Yes. Set the timer once and the lights will turn on for 6 hours and off for 18 hours on a daily loop, so they double as a nap cue and a bedtime wind down signal without you having to reset them every night.
Can I use these in a shared playroom with multiple kids?
Yes. The cool to touch design, no flame, no wax, and low voltage adapter make them safe for a room where several kids are playing, and the 8 modes let you pick a calm steady glow or a more playful twinkle based on the moment.
Will the colors overstimulate my child at night?
Switch to a steady mode in the evening, which reads as a soft, even glow, and the auto timer will turn them off after 6 hours. The multicolor mix is also lower intensity than a single bright white, so it is unlikely to keep a child awake.
Are there any small parts a baby could choke on?
The LED bulbs are fixed to the wire and there are no loose parts, removable batteries, or small accessories. The adapter is a single sealed unit, so there is nothing for a baby or toddler to detach and swallow.
Will my pet knock the lights down or chew through them?
Mount the strand above pet reach, use clear cable clips every few feet, and route the lead wire along a baseboard with a cord cover. Because the strand is cool and low voltage, a curious pet is far safer around it than around candles or standard lamps.
How do these compare to a plug in night light for a child room?
A standard night light covers a small area with one color. This set covers an entire wall, ceiling, or canopy with adjustable modes and a 6 hour auto shutoff, so it works as a night light, a decor piece, and a sleep cue in one.
How do these compare to a salt lamp or wax warmer for a kid room?
Salt lamps get hot to the touch and wax warmers involve melted wax and a heating element. This LED strand stays cool, has no hot parts, and no wax, which makes it the safer option for a room where a child sleeps or plays.
Is it safe to leave plugged in overnight in a kids room?
Yes. The 6 hour auto timer turns the strand off after your child falls asleep, and the 30V low voltage means the bulbs stay cool. Many parents use it as part of the bedtime routine and let it run on its timer without worry.
Will this work for a toddler room that already has a night light?
It pairs well with a night light. Use a steady mode for ambient glow and the night light for focused reassurance, and the auto timer turns the strand off after 6 hours while the night light stays on, giving you a layered sleep setup.
How do I set up the string lights for the first time?
Unroll the strand, mount it on your chosen surface with hooks or clips, plug the 30V adapter into a standard outlet, and press the button on the adapter to turn the lights on. Press the button repeatedly to cycle through the 8 modes, then leave it on your favorite mode and the memory function will remember it for next time.
How does the 6 hour on / 18 hour off timer work?
Press and hold the button on the adapter for about 3 seconds until the indicator light turns on, and the timer activates. The lights will stay on for 6 hours, turn off for 18 hours, and repeat on a daily loop until you unplug the set or deactivate the timer.
How do I link multiple strands together for a longer run?
Each set has a connector on the end opposite the adapter. Plug the next strand connector into the previous strand, twist the waterproof cap to secure it, and repeat up to 4 sets for a total of 132 ft of lit length on a single outlet. Only one adapter is needed for the linked run.
Does this work with a smart plug or outdoor smart outlet?
Yes. The set plugs into any standard 110 to 120V outlet, including smart plugs, outdoor smart outlets, and timer outlets. The built in 6 hour timer can run alongside a smart plug schedule if you want extra control, but you do not need a smart plug to use the set.
Will this work with a dimmer switch?
The set is not designed to be used with an external wall dimmer, and doing so can damage the adapter. Use the 8 built in modes and the 6 hour timer to control your experience without an external dimmer.
What is included in the box?
The box includes one 33 ft LED string light strand with 10 ft lead wire, the 30V low voltage adapter, and a user manual. Mounting hardware is not included, so you will want to pick up clear Command hooks, zip ties, or outdoor clips based on where you plan to install it.
How long will the LEDs last before I need to replace them?
LEDs are rated for tens of thousands of hours of use. With typical seasonal and year round use, most users get many years of service from a single set. There are no bulbs to replace, and the sealed design means no maintenance is required.
Can the lights be used in rain, snow, or extreme heat?
The IP44 waterproof rating covers rain, snow, splashing water, and typical outdoor conditions. The strand is designed for year round outdoor use, but the adapter should be plugged into a covered outlet and the connection points should be kept free of standing water.
What is the difference between fairy lights, string lights, and twinkle lights?
Fairy lights, string lights, and twinkle lights are all common names for the same category of small bulb LED strands on a flexible wire. Fairy lights often refers to the thinner, more delicate wire, string lights is the broader category, and twinkle lights refers to sets with flashing or animated modes, all of which describe this set.
